Charger pinout
OneWheel Pint Home Charger
63 V NMC battery charger
- Input: 100-240 Vac, 50/60 Hz, 1 A, 100 VA
- Output: 63 Vdc, 1.3 A
Connector (2 pin female mini DIN / GX12-2) pinout:
Voltage measurements across pairs of leads:
| - | + | Result |
|---|---|---|
| 1 | 2 | -63 Vdc |
| 2 | 1 | +63 Vdc |
Found polarity:
- 63 Vdc
- Ground
Onewheel+ XR Home Charger
63 V NMC battery charger
- Input: 100-240 Vac, 50/60 Hz, 300 VA
- Output: 63 Vdc, 3 A
Connector (3 pin female XLR) pinout:
Voltage measurements across pairs of leads:
| - | + | Result |
|---|---|---|
| 1 | 2 | 63 Vdc |
| 1 | 3 | 63 Vdc |
| 2 | 1 | -63 Vdc |
| 2 | 3 | 0 Vdc |
| 3 | 1 | -63 Vdc |
| 3 | 2 | 0 Vdc |
Found polarity:
- Ground
- 63 Vdc
- 63 Vdc
Other Models
The Onewheel+ is not NMC I don’t think and the charger specs are 58 Vdc / 3.5 A I think, the Onewheel+ XR ultracharger is probably 63 Vdc / 5 A, but I don’t know either of these, so I cannot verify these numbers.
Onewheel+ XR to Onewheel Pint Charger Adapter
Connectors:
- 3pin female XLR
- 2pin female mini DIN
Wiring:
| Onewheel+ XR | Onewheel+ Pint |
|---|---|
|
|
| 1 | 2 |
| 2 | 1 |
| 3 |